Ion air gun can produce large amounts of air with a positive and negative charge, high-speed blow compressed air can be the charge on an object in and out. When the charge of negative surface charge, it will attract positive charge in the air, the surface electric charge when the charge is positive, it will attract the flow of negative charge, so that static electricity on the surface to be in and , the purpose of eliminating static electricity, high-speed compressed gas can also be stubborn dust blown off above the object. Features 
 1, medium, and static electricity quickly. 
 2, the ion flow large coverage. 
 3, the wind adjustment range. 
 4, air guns have a good grounding protection. 

 Features 
 1, the plastic can also adjust the air pressure gun size, gun lighter, feel better, more user-friendly design 
 2, in addition to electrostatic dust effect. 
 3 tips using high pressure high temperature Teflon material, service life longer than ordinary ionic air gun. 
 4, ion air guns can also adjust the air pressure outlet size. 
 The main purpose 
 Mainly used to eliminate static electricity, remove the dust. Solve the electrostatic damage to electronic products, cleaning problems caused by static electricity, electrostatic adhesion problems caused by the product. Stick-ion air gun is widely used in plastic coating, the electronics industry, LED optical, printing, packaging, plastic film cut, circles and film, etc. 
 Technical parameters 

 Operating voltage 4.6KV 
 Power 15W 
 Weight 0.4kg 
 3M high-voltage wire length 
 Operating temperature -10 ° C ~ 50 ° C 
 Compressed air pressure of 40 ~ 70psi 
 Test Results 

 Test Conditions 
 Voltage 4.6kv test voltage 5KV to 500V 22 ℃ ambient temperature 
 Distance 
 300mm 600mm 900mm 
 And in time is 0.4s 0.5s 1.1s 
 Negative 0.4s 0.5s 0.9s 
 Residual voltage is-23V-18V +14 V 
 Negative-29V-16V +17 V 
 Notes: 1, the test data to SIMCO FMX-003 electrostatic tester test results shall prevail. 
 2, the test data for testing the environment, air, temperature and humidity vary. 
 Work 
 ST302C ion air gun need only be used with power supply, power supply 220V or 110V input voltage will rise to 4.6KV, and then through the high-voltage wire connected to the ST302C ion ion air gun head pins, needles and tips of the ion strong electric field generated between, through cutting-edge high-voltage corona discharge ionizing the air molecules, ion needle tip produces a large number of positive and negative ions. And then blown through the compressed air charged ion surfaces, when a positive charged surface potential, the negative ions will be one and, on the contrary, if the surface is negative potential, positive ions will be one and to achieve the purpose of eliminating static electricity, while high-speed Compressed air can also blow away the dust on the object. 
 ST302C ion air gun use ST302C ion air gun should be equipped with ST401A power supply and compressed air can be used. Ion air gun to ST302C high-voltage wire connected to the ST401A power supply, then the tube into the trachea ST302C interface ion air gun, turn on the power and compressed air can be used, and facing the need to place than electrostatic dust blowing to to eliminate static electricity and dust,